When Kate White received a “very large” gas bill for her empty Sydney home, she was shocked.
News stories about energy prices going up meant she had accepted she would be paying higher prices for her hot water.
But this time she paid particular attention because her Summer Hill home had been vacant for months while undergoing renovation.
She called her gas provider, AGL, and discovered the bill had been estimated.
Ms White then manually entered her meter reading, and the bill more than halved.
The follow-up bill, also calculated by estimation, was $658.68 and after again entering the meter read the bill dropped to just $132.68.
Ms White had never challenged a bill before, because she assumed they were always based on her actual usage.
“It’s not easy to see on the paper bill that’s it an estimate, it’s on the final page right down the bottom in small writing,” she said.
“Until you know that’s what they’re doing you don’t know to look for it.”
Ms White posted on a community Facebook page about her experience and was flooded with respondents that also had no idea this was common practice for both electricity and gas bills.
“I don’t think this is fair, in any way shape or form.”
Meter readings and estimations are the responsibility of distributers, in Ms White’s case Jemena, who pass it onto the retailer issue a bill to the customer.
Ms White said an AGL representative told her that Jemena did not always have the resources to send workers out to read people’s meters.
Jemena said in a statement it physically read about 93 per cent of meters each billing cycle, and have sent somebody out to Ms White’s house on seven other occasions.
How energy companies are using estimates
Distributers, such as Jemena, are regulated by a national body to ensure they are getting actual readings according to guidelines.
The Energy and Water Ombudsman NSW said this oversight prevents estimates being used as a cost-cutting measure.
Retailers, such as AGL, are obliged to “use its best endeavours” to ensure actual meter readings are carried out frequently, and at least once a year, according to the Australian Energy Market Commission’s National Energy Retail Rules.
The Australian Energy Market Commission ruled that customers from February 2019 had the right to challenge an estimated bill, and obtain an adjustment based on an actual read.
It ruled that retailers would need to indicate “in advance” that a bill would be based on an estimate, and “a range of methods” by which a person can lodge a self-read.
Ms White said she wasn’t given any warning, or additional information.
AGL said in a statement bill estimates were based on a number of factors including “past energy usage and the average usage of similar customers”.
“Customers who receive an estimated bill are able to submit their own read directly to us via the AGL App or over the phone.”
Jemena said in a statement a “small number of bills” are estimated when meter readers are unable to access meters.
“We also continuously analyse our records to identify customers who have received a number of estimated gas bills, and together with the customer’s retailer, work to ensure a physical read of the meter can be conducted.”
Meter readers have traditionally required physical access to properties and if that was restricted, for example because the meter was behind a locked gate or there was a dog in the yard, estimates were generated.
But people are reporting their meters are perfectly accessible and still not being read.
Energy and Water Ombudsman NSW records hundreds of complaints about estimations each year, with the vast majority about energy bills, with very few about water usage estimates.
Common yet over-looked practice
Energy consumer advocate Craig Memery said while estimates were important so people are not hit with a bill for six or 12 months’ worth of usage, companies need to better communicate with customers.
“People go for years without realising their bills were estimates,” he said.
“If estimated reads are recurrent, then retailers should go a further step, maybe sending a separate letter to let them know, a note in their letterbox or under their door.
“There needs to be a reason they can’t physically read the meter, and they need to let the customer know what that is, so it can be fixed.”
Mr Memery said he does not believe energy companies are not out to profit by over-estimating, but pointed out it is the customers who ends up paying if the their bill is wrong and they do not know to check.
Under-estimations also occur, and people are then billed for the extra amount, in their next cycle when there has been an actual read, Mr Memery said.
But Mr Memery said the onus was on the meter providers to sort it out.
“It’s just not appropriate to have that responsibly and then say, ‘we don’t have the resources to do it’.”
Smart meters are digital and record energy consumption in at least 30-minute intervals that are transmitted to the energy retailer, and can be accessed remotely.
The Victorian government mandated the rollout of smart meters to households and small businesses in 2006.
In NSW about 30 per cent of households currently have one, which is roughly similar in the ACT, Queensland, South Australia, and Tasmania.
Grattan Institute’s energy program director Tony Wood said smart meters will solve many of these billing issues, but acknowledged data security may be of concern down the track.
Billing complaints increase
The NSW Energy and Water Ombudsman received 28,000 complaints this final financial year — up from about 18,000 last year.
It includes a 60 per cent increase in complaints about billing estimations.
Energy prices in NSW have risen by 43 per cent over the past two financial years.
Ombudsman Janine Young has never seen the price of power so high and many households are already struggling to pay bills.
“For people that are doing it really tough, that means they might not be putting food on the table for the kids or other things that are really necessary,” she said.
University of Sydney’s law school energy transition expert Penelope Crossley said the sector was subject “to very complex regulation”.
“There’s a very delicate balance in trying to give consumers enough information that they can make informed decisions, but not completely overwhelming them with complexity and challenges that they don’t necessarily need,” she said.
Ms Crossley said most people do not want the hassle of chasing up their energy companies.
“The average energy consumer doesn’t want to have to think deeply about their energy bills.They’re already worried about cost of living pressures, they’re flat out,” she said.
One survey of 2,500 adults across Australia, conducted by Energy Consumers Australia, found 89 per cent wanted more information about their energy use and costs.
The same survey found 24 per cent of respondents trusted their energy retailer to provide information to reduce their energy bills.
For example, under the current rules, retailers are not required to provide advance notice that their time of use tariffs have changed.
What to do when the bill doesn’t look right?
Old meters, that aren’t “smart”, should be physically read at least once a year.
Customers have a right to challenge any estimated bill.
Some companies allow customers to manually input their meter read online to adjust the bill.
Ms White was told to pay the estimate in full and the extra amount would be deducted from her next bill.
Some retail companies provide apps for people to simply input their accurate meter read using a smartphone.
People should always contact their local ombudsman if they feel their issue hasn’t been solved.
Loading…